Безплатна доставка до офис на Еконт за поръчки над 150лв.


139.00лв. 125.00лв.

на 12 вноски по 12.30 лв.



APART CM20DT is 6.5″ two-way design ceiling speaker 100-70 volt / 20 watts, 16 ohms / 60 watts, white, with design thin edge grille and basket integrated neodymium magnets for a perfect seal, removable logo and quick fit push connector

Sharing the technical and acoustic specifications of the updated CM Series, Apart is proud to announce its new CM Design Series. The thin edge grille and integrated neodymium grille fixing magnets will guarantee an easy, smooth and elegant integration in every environment. The astonishing ease of installation and attention to detail of the CM1008D, CMX20DT, CM608D & CM20DT will not only amaze the architect and end-user, but will also impress audio installers worldwide.

The CM20DT 6.5” two-way built-in loudspeaker can be used in 16 ohms or 70/100 volt modes. The high-quality 70/100 volt transformer is equipped with an easy tapping sticker with clear colour indication. The transformer colours are aligned with the cables connecting the Apart Quick Fit connector, a handy installer connector via push terminal.

In 16 ohms use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 ohms amplifier. The paintable thin edge grille makes CM20DT the ultimate loudspeaker for design interior integration

Technical Specifications:

• Just that little extra power!
• 6.5” enforced PP woofer, 1” tweeter
• 60 Watts program power @ 16Ohm
• Alu grill: no rust. For humid environments, bathrooms, …
• 20 – 10 – 5 Watts 100 Volt transformer
• Sensitivity: 92dB/1W/1m
• Frequency Responce: 60Hz-20kHz
• Dispersion Angle at 1kHz: 180°
• IP50
• Dimensions: 210 (d) x 80 (h) mm
• Cut-out diameter: 186mm


outside diameter 210 mm depth 80 mm
cutout 186 mm installation grip range 2 – 25 mm
loudspeaker system 2-way woofer size 6.5 inch
woofer cone material polypropylene tweeter size 1 inch
mounting system 3 screws 100V transformer power taps 20 – 10 – 5 watts
70V transformer power taps 20 – 10 – 5 – 2.5 watts impedance 16 ohms
low impedance dynamic power 60 watts low impedance RMS power 30 watts
SPL 1W/1m 86 dB max SPL 1m 104 dB
frequency response 60 – 20K Hz main construction material ABS plastic
grille main material steel IP rating 50
applicable low impedance yes applicable in 100V yes
Vertical dispersion angle 1000 Hz 180° closest RAL colour (subject to deviations) RAL9010
Net weight product 1.24 kg