ProAc Response DT8

Описание

ProAc Response DT8

(Black Ash / Mahogany / Cherry / Walnut/ Silk White/Natural Oak) – 6639 лв.
(Ebony / Rosewood) – 8542 лв.

The latest ProAc floor standing design, the new ProAc Response DT8, incorporates production parts from the chassis through to the magnet system, spider and voice coil that are painstakingly selected from materials that excel in their particular frequency range.

Utilising 2 x 6.5 inch drivers, the pulp mica cone unit delivers exceptional bass performance in a ported cabinet with the bass loaded via side vents and the polypropylene unit gives a smooth, detailed and uncoloured midrange. Both drivers work in tandem resulting in a well extended low frequency response and ProAc’s signature natural sounding midrange quality and pinpoint imagery.

These frequency ranges are then cleverly overlapped by a new, Stewart Tyler designed, crossover which seamlessly integrates ProAc’s proven 1 inch soft dome tweeter, offset on the front baffle, and placed between the 2 drivers. Some manufacturers frequently use the same drive unit cone material in each of the models in their range. ProAc has taken a different approach and has previously used carbon fibre, kevlar, pulp and polypropylene. However this is the first time they have used two different types of unit in a two-way design.

The new Response DT8 now takes its place in the ProAc range as the entry level floor standing design.

Nominal Impedance 4 ohms
Recommended Amplifiers 20 to 180 watts
Frequency Response 38Hz to 30kHz
Sensitivity 90 db linear for 1 watt at 1 metre
Bass/Midrange 2 x 6.5″ (165mm) bass/ mid units. One driver with pulpmica cone and open weave dust cap and one driver with polypropylene cone with soft polypropylene dust cap. Both units working in tandem.
Tweeter ProAc 1″ (25mm) silk dome tweeter
Crossover Specially designed crossover to accommodate two different types of bass/ mid cones. Glass fibre board with finest components using multistrand copper wire designed for use with both Biamping and Bi-wiring.

Dimensions 38.5″ (978mm) high (on spikes), 7.6″ (193mm) wide, 9″ (229mm) deep
Weight 55lbs (26Kgs) each

Mode Floor Standing
Grille Acoustically transparent crimplene Finish

Standard Finishes: Black Ash, Mahogany, Cherry, Maple and Oak
Premium Finishes: Rosewood, Ebony.