Описание
Presonus PRM1
Features
- ¼-inch, pre-polarized electret-condenser capsule
- Linear frequency response between 20 Hz and 20 kHz
- Omnidirectional polar pattern
- Low noise, low distortion
- All-metal chassis
- Comes with a clip, foam windscreen, and hard case
- High-quality components and rugged construction
- Suitable for system analysis and measurement
- Especially recommended for use with PreSonus® StudioLive® mixers and VSL with Smaart® Measurement Technology
Technical Specifications
General | |
|---|---|
| Type | Black electret condenser |
| Element | Pressure, FET preamplifier |
| Polar Pattern | Omnidirectional |
Performance | |
|---|---|
| Frequency Response | 20 Hz to 20 kHz |
| Sensitivity (@ 1 kHz open-circuit voltage) | -37 dB/Pa (14 mV/Pa) 1 Pa=94 dB SPL |
| Rated Impedance | 200Ω |
| Minimum Load Impedance | 1,000Ω |
| EIN (A-weighted) | 26 dB |
| Max. SPL (1 kΩ load) | 132 dB SPL (THD ≤ 1%, 1 kHz) |
| Dynamic Range (1 kΩ load) | 106 dB |
| S/N Ratio | 70 dB |
Connections | |
|---|---|
| Polarity | Pin 2 output positive voltage (relative to Pin 3) when diaphragm receives positive pressure (moves inward) |
| Connector | 3-pin XLR Male |
Power | |
|---|---|
| Phantom Power | 9-52V |
| Current Consumption | 2 mA |
Physical | |
|---|---|
| Length | 7.56” (192 mm) |
| Width | 0.83” (21 mm) |
| Weight | 5.3 oz (150g) |
| Finish | Metal, matte black |
| Environmental Conditions | 10-50˚ C, humidity 0-95% |
Отзиви
Все още няма отзиви.